Are you struggling with unstable machining with your
indexable tools? Higher cutting force is one of the main causes of vibration
and instability. You want to achieve lower cutting force to prevent vibration,
but you are also looking for ways to improve productivity. OSG’s PHOENIX® PSE (90°
indexable shoulder cutter) and PHC (indexable high feed cutter) offer solutions that
not only provide lower cutting forces and better productivity, but also enhanced
rigidity and improved quality of your finished parts.
Many conventional shoulder mills have difficulty with
ramping and helical milling operations due to their design. OSG's PHOENIX® PSE enables productive ramping
and helical milling
with the insert's bottom
notch feature. The PSE's cutting geometry also generates lower cutting forces,
and the insert's wiper edge produces superior
surface finish. PSE is a multi-purpose cutter that can
tackle a wide range of applications including facing, side milling, slotting,
ramping and helical milling! Watch PSE in action!
If you have specific needs for a rough milling application and achieving high metal removal rates, our PHC is the go-to tool for you. A combination of sharp cutting edge and high feed cutting edge design makes it possible to achieve productivity and low cutting force even with overhangs! PHC’s economical 4-corner insert with a chip breaker enhances cutting performance while maintaining rigidity. Watch PHC in action!
a limited time only, you can save on our high performance indexable milling
cutters. Take advantage of our amazing deals to achieve stable milling! Click HERE
to learn more about the deals!